The N4L LPA Series Laboratory Power Amplifiers are widely used in industrial and educational segments from quality reliability and affordable prices. The LPA01 Laboratory Power Amplifier is a wide bandwidth DC accurate amplifier developed to provide high accuracy amplification in an industrial or laboratory environment for high frequency, high current testing of wound components and high frequency excitation of servos and actuators up to 1A. The LPA400 Laboratory Power Amplifier is a wideband high voltage amplifier for an industrial or laboratory environment for high voltage, high frequency calibration and driving high voltage actuators (e.g. piezo) up to ±400V. Designed originally for use with the N4L PSM range of Phase Sensitive Multimeters (Frequency Response Analyzers), the LPA Series can be used anywhere where there is a need to boost a signal either in voltage or current.
N4L URL : http://www.newtons4th.com/products/laboratory-power-amplifiers/
DC and AC wide bandwidths
Switch selectable coupling options: AC, AC+DC or AC with reduced DC
Switch selectable precision gain and bandwidth
High slew rate
Isolated from ground to prevent earth loops
Stable into any load
Robust metal enclosure
For frequencies up to 1MHz, the total harmonic distortion of LPA01 is typically less than 0.6% (See photo section)
A. BNC Input & BNC Output Electrical Connection I/O Interfaces (LPA01)
B. BNC Input & BNC Output, 4mm Safety Electrical Connection I/O Interfaces (LPA400A, LPA400B)
C. Soft Carry Case
D. Operation Manual
E. Power Cable
A. TA107: DC to 100kHz, 5pA to 500nA, 10MVolts per Amp Gain Transimpedance Amplifier (For High Impedance Measurement)
B. TT-HV 250 High Voltage Probe (Passive): 2.5kVpk – 100:1
C. HF010m: 10mΩ, 20Arms, 1MHz Current Shunt (Supplied with Safety BNC to BNC Connector)
D. HF100m: 100mΩ, 6Arms, 1MHz Current Shunt (Supplied with Safety BNC to BNC Connector)
E. HF470m: 470mΩ, 3Arms, 1MHz Current Shunt (Supplied with Safety BNC to BNC Connector)
F. HF01A: 1Ω, 1Arms, 1MHz Current Shunt (Supplied with Safety BNC to BNC Connector)
Miko, established in 1980, is a leading instrumentation distributor in Hong Kong and China.
Over the years, we have been fully engaged in the sales and marketing of electronic T&M instruments in the territory. Our market sector coverage includes telecommunication, power, data communication, audio, broadcasting and education.