IT6832B (192W, 32V/6A, Output Resolution 1mV/0.1mA, 1-Ch Programmable DC Power Supply with RS232, USB and GPIB Interfaces)

Brand: ITECH
Model Series: IT6800 Series

About Product

The ITECH IT6800 Series Programmable DC Power Supplies are single output programmable DC power supplies which are designed and built to deliver reliable and stable DC power. The IT6800 Series are composed of 6 models and all models are with high resolution 1mV/0.1mA in max, adjustable output timer function, supporting panel list programming procedures, OVP/OTP protection functions, all providing the greatest test convenience. With built-in RS232, USB and GPIB interfaces (RS232 and USB interfaces for IT6831A, IT6832A and IT6833A), they can be used both on benchtop and systematical.  The IT6800 Series are high performance products; they are strong, smart and reliable DC power sources in favorite for multi-purpose power testing solution and application.

Product Features

  • Display screen: VFD display
  • Maximum output power of single channel up to 216W, output voltage 72V and output current 3A (IT6833A, IT6833B)
  • High output voltage and current resolution
    • 1mV/0.1mA (<10A) & 1mA (≥10A) (IT6831A, IT6831B)
    • 1mV/0.1mA (IT6832A, IT6832B, IT6833A, IT6833B)
  • High output voltage and current accuracy
    • ≤ 0.04% + 8mV/≤ 0.1% + 12mA (IT6831A, IT6831B)
    • ≤ 0.04% + 8mV/≤ 0.1% + 8mA (IT6832A, IT6832B)
    • ≤ 0.04% + 8mV/≤ 0.1% + 5mA (IT6833A, IT6833B)
  • High voltage and current readback resolution
    • 1mV/0.1mA (<10A) & 1mA (≥10A) (ITS6831A, IT6831B)
    • 1mV/0.1mA (IT6832A, IT6832B, IT6833A, IT6833B)
  • High output voltage and current readback accuracy
    • ≤ 0.04% + 8mV/≤ 0.1% + 12mA (IT6831A, IT6831B)
    • ≤ 0.04% + 8mV/≤ 0.1% + 8mA (IT6832A, IT6832B)
    • ≤ 0.04% + 8mV/≤ 0.1% + 5mA (IT6833A, IT6833B)
  • Low ripples/low noise (20Hz-20MHz)
    • ≤ 4mVp-p/1.5mVrms (IT6831A, IT6831B)
    • ≤ 4mVp-p/1mVrms (IT6832A, IT6832B, IT6833A, IT6833B)
  • Dynamic recovery time in recovery of 75mV
    • ≤ 100µs (IT6831A, IT6831B)
    • 100µs (IT6832A, IT6832B)
    • 200µs (IT6833A, IT6833B)
  • Convenient data entry via knob or numerical key pad
  • Output programmed voltage and current
  • Intelligent fan control, energy conservation and noise reduction
  • List mode: Capable output wave based on edit voltage/current with time variations
  • Adjustable output timer function: 1s – 9999.9s
  • Remote sense: The remote sense interface to compensate line voltage, increase output accuracy
  • Protection function
    • OVP and OTP protection functions are available for all models
    • OCP protection function (IT6831B, IT6832B, IT6833B)
  • Versatile interface
    • RS232 and USB are provided as standard for all models
    • GPIB is provided as standard (IT6831B, IT6832B, IT6833B)

Product Functions

  • List mode with the aid of simple operation panel: The IT6800 Series cangenerate a complex current sequence by editing value and time of each step. A list file includes following parameters: the unit of time, voltage, current, time width of single step, whether to end, cycling steps, and whether to save the list. After programming the list, the power supply starts to run the list file once receiving a trigger signal, continue to run until end of the operation or receiving another trigger. On the contrary, a user can, according to the application and testrequirement, edit or modify the voltage, current and time with keypads through IT6800 Series’ list mode function. Without software, once the power supply receives the trigger signal, the preset output waveform can output and change automatically (See photo section)
  • Adjustable output timer function: When the output timer function is enabled, the “Timer” indicator will lit on the VFD. When the output is “on”, the output will turn off automatically after the time elapsed. The range of the adjustable output timer function is 0.1s – 9999.9s
  • Remote sense can be used to compensate for voltage (up to1V) due to resistance from test leads connected to your device under test (DUT), thus providing more accurate output voltage. The power supply is initially setup to local sense mode by default (See photo section)
  • SCPI supported

Product Application

  • Automotive electronics test solution such as testing of cigarette lighter via operating high accuracy current measurement
  • Electric vehicle test solution
  • Solar and photovoltaic inverter test solution
  • LED lighting and driver test solution
  • Battery test solution
  • Power supply test solution

Standard Accessories

  1. GPIB Interface (IT6831B, IT6832B, IT6833B)
  2. RS232 Interface
  3. USB Interface
  4. USB Cable
  5. Calibration Certificate
  6. CD (Operation Manual & Communication Protocol Manual)
  7. Power Cable

Product Options

  1. IT-E151: 19” Rack Mount Kit

Related Catalog

IT6800 Series Catalog

Our Company

Miko, established in 1980, is a leading instrumentation distributor in Hong Kong and China.

Over the years, we have been fully engaged in the sales and marketing of electronic T&M instruments in the territory. Our market sector coverage includes telecommunication, power, data communication, audio, broadcasting and education.