IT6121B (100W, 20V/5A, Output Resolution 1mV/0.1mA, 1-Ch High Speed and High Accuracy Programmable DC Power Supply)


Brand: ITECH
Model Series: IT6100B Series
Category:

About Product

The ITECH IT6100B Series Programmable DC Power Supplies are single output programmable DC power supplies which are designed and built to deliver reliable and stable DC power. The IT6100B Series are composed of 5 models and all models are with high resolution 1mV/0.1mA, fast voltage rise speed, adjustable output timer function, supporting panel list programming procedures, OVP/voltage-/current-limiting protection functions, all providing the greatest test convenience. With built-in USB and RS232 interfaces, they can be used both on benchtop and systematical.  The IT6100B Series are high performance products; they are strong, smart and reliable DC power sources in favorite for multi-purpose power testing solution and application.

Product Features

  • Display screen: VFD display
  • Maximum output power of single channel up to 150W
    • Output voltage 30V and output current 5A (IT6132B)
    • Output voltage 60V and output current 2.5A (IT6133B)
  • High output voltage and current resolution: 1mV/0.1mA
  • High output voltage and current accuracy
    • ±0.03% + 3mV/±0.05% + 2mA (IT6121B, IT6122B)
    • ±0.03% + 6mV/±0.05% + 1mA (IT6123B)
    • ±0.03% + 3mV/±0.05% + 2.5mA (IT6132B)
    • ±0.03% + 6mV/±0.05% + 1.5mA (IT6133B)
  • High voltage and current readback resolution: 1mV/0.01mA
  • High output voltage and current readback accuracy
    • ±0.02% + 3mV/±0.05% + 2mA (IT6121B, IT6122B)
    • ±0.02% + 5mV/±0.05% + 1mA (IT6123B)
    • ±0.02% + 3mV/±0.05% + 2.5mA (IT6132B)
    • ±0.02% + 5mV/±0.05% + 1.5mA (IT6133B)
  • Low ripples/low noise (20Hz-7MHz)
    • < 3mVp-p/1mVrms (IT6121B, IT6122B)
    • < 4mVp-p/1mVrms (IT6123B, IT6132B)
    • < 5mVp-p/1mVrms (IT6133B)
  • Luminous LED key
  • Fast voltage rise speed (< 20ms)
  • Convenient data entry via knob or numerical key pad
  • Use cursor adjusting step value
  • List mode: Capable output wave based on edit voltage/current with time variations
  • On time output function with time range 0.01s – 60000s
  • Output programmed voltage and current
  • Intelligent fan control, energy conservation and noise reduction
  • Remote sense interface to compensate line voltage, increase output accuracy
  • Memory capacity: 100 groups, for save and recall
  • Hold during power off memory function
  • External analog signal control the power input and output
  • Built-in 5½ Digital Voltmeter and Digital Milliohmmeter
  • Versatile interface: USB and RS232 are provided as standard, GPIB as option

Product Functions

  • Fast voltage rise speed (< 20ms): Comparing with general high speed power supplies, the IT6100B Series reduce their ripple and noise to the lowest level. The high voltage rise speed (< 20ms) suits for all high speed and precise testing occasions (See photo section)
  • List mode: The List mode allows to edit output waveform based on current/voltage with time variations. The list parameters include operating modes (continuous mode or single-step mode), recycling times, single-step voltage, single-step current, single-step time and saving file name. After the list editing is finished and when a trigger signal is received, the power supply will work according to the list steps (See photo section)
  • Remote sense: The remote voltage sensing is used to maintain good regulation at the load and reduce the degradation of regulation that would occur due to the voltage drop in the leads between the power supply and the load. By connecting the supply for remote voltage sensing, voltage is sensed at the load rather than at the supply’s output terminals. This will allow the supply to automatically compensate for the voltage drop in the load leads and improve regulation (See photo section)
  • Digital Voltmeter and Digital Milliohmmeter (See photo section)
    • Digital Voltmeter: The IT6100B Series provide 5 ½ voltage meter to measure external voltage with measuring range: 0~40V
    • Digital Milliohmmeter: The IT6100B Series provide 4-wires resistance measurement method with measuring range: 0~1kΩ
  • SCPI is supported

Product Application

  • Automotive electronics test solution
  • Solar and photovoltaic inverter test solution
  • LED lighting and driver test solution
  • Battery test solution
  • Power supply test solution
  • Wireless charger
  • Anode power supply test in electroplating, electrolysis and ionization industries

Standard Accessories

  1. RS232 Interface
  2. USB Interface
  3. USB Cable
  4. Calibration Report
  5. CD (Operation Manual & Communication Protocol Manual)
  6. Power Cable

Product Options

  1. GPIB Interface
  2. IT-E151: 19” Rack Mount Kit

Related Catalog

IT6100B Series Catalog

Our Company

Miko, established in 1980, is a leading instrumentation distributor in Hong Kong and China.

Over the years, we have been fully engaged in the sales and marketing of electronic T&M instruments in the territory. Our market sector coverage includes telecommunication, power, data communication, audio, broadcasting and education.

Related products