964i (High Voltage Switching System Mainframe with 8 Card Capacity)


Brand: Vitrek
Model Series: 950i Series
Category:

About Product

The Vitrek 964i High Voltage Switching System is purposely built to fully and precisely automate high voltage switching needs. The 964i holds up to 8, eight channels HV switching cards.  That’s up to 64 test points in a single mainframe – multiple units can be combined to increase capacity. Whether a user has to hipot an 8 pin connector, a 64 conductor cable or an entire tray of SMD capacitors, the 964i has the capacity to automatically route test points to the tester.  Standard front inputs connect directly to your Hipot/Continuity Tester and up to 60 rear panel terminals connect with your test fixture or DUT. Up to four 964i’s can be controlled directly by a single Vitrek 950i Series or V7X Series Hipot Tester or up to 10 via PC through the 964i’s built-in RS232 (Serial) port or available GPIB interface. The 964i’s LCD display confirms system status and switch activation at a glance.

Product Features

  • High voltage ratings to 3kV, 7kV, 10kV or 15kV
  • High current ratings to 40 Amps
  • Reduces hazardous operator exposure to high voltage
  • Improves test quality, consistency and repeatability and enhances end product quality and reliability
  • Complete flexibility: A user can order custom combinations of relay cards, terminals and wiring. Up to 64 relays and 65 terminals can be installed in a single chassis
  • The 964i front panel for easy connection to Vitrek 950i Series Electrical Safety Compliance Analyzer or V7X Series High Voltage Safety Analyzer
  • The 950i Series and V7X Series can control up to 4 units of 964i
  • The 964i rear panel accommodates up to 60 output terminals with 16 + terminals (HV) and 16 – terminals (return). The 964i ships with mating connectors for all +/- HV terminals 7kV and higher. Custom length HV lead sets are optionally available (See photo section)
  • Self-testing
    • Continuously checks that each relay is being driven according to the last received command. A hardware failure in the 964i is detected and an error is raised. Continuously checks that sufficient DC power is applied to the relays to ensure correct operation
  • QuickTest Pro II graphical software available for PC total system control and data acquisition over 950i Series or V7X Series and up to 16 units of 964i
  • Versatile interfaces: RS232 and VICL (Vitrek Hipot Control) are provided as standard, GPIB optional
  • CE mark certified to EN 61010
  • Country of Origin:  USA

Product Functions

  • High voltage switching

Product Application

  • The perfect solution for automated multi-conductor, multi-point hipot testing

Standard Accessories

  1. RS232 Interface
  2. VICL Interface
  3. Operation Manual
  4. Power Cable

Product Options

  1. 964i-8X2MX: Pre-built 964i with 2 Each 7kV 8-channel Card and a Hipot/Cont Mux Card
  2. 964i-16X2MX: Pre-built 964i with 4 Each 7kV 8-channel Card and a Hipot/Cont Mux Card
  3. 964i-24X2MX: Pre-built 964i with 6 Each 7kV 8-channel Card and a Hipot/Cont Mux Card
  4. LV3-8R: 3kV Single (+) Input Bus 8 Outputs, Red Banana Jacks
  5. LV3-8B: 3kV Single – Input Bus 8 Outputs, Black Banana Jacks
  6. LV3-8S: 3kV (-) Bus Input 4 Outputs Blk, (+) Bus Input 4 Outputs Red
  7. LV3-MX2: 3kV Dual Input (HV/Cont) Single Output (+) Bus
  8. HV7-8W: 7kV Single (+) Input Bus 8 Outputs, White HV Terminals
  9. HV7-8B: 7kV Single (-) Input Bus 8 Outputs, Black HV Terminals
  10. HV7-8S: 7kV (-) Bus Input 4 Outputs Blk, (+) Bus Input 4 Outputs White
  11. HV7-MX2: 7kV Dual Input (HV/Cont) Single Output (+) Bus
  12. HV10-8W: 10kV Single Input Bus 8 Outputs, White HV Terminals
  13. HV10-8B: 10kV Single Input Bus 8 Outputs, Black HV Terminals
  14. HV10-MX2: 10kV Dual Input (HV/Cont) Single Output (+) Bus
  15. HV15-8W: 15kV Single Input Bus 8 Outputs, White HV Terminals
  16. HV15-8B: 15kV Single Input Bus 8 Outputs, Black HV Terminals
  17. HV15-MX2: 15kV Dual Input (HV/Cont) Single Output (+) Bus
  18. GP-964: GPIB Interface Option
  19. GP-1 GPIB Cable, 1m
  20. VICL-2: Replacement Vitrek Hipot Communication Cable, 7ft
  21. RM-1: Rack Mount Kit
  22. HVC-MW: Additional Male HV Mating Connector, White
  23. HVC-MB: Additional Male HV Mating Connector, Black
  24. HVC-FW: Female HV Panel Mount Receptacle/Connector, White
  25. HVC-FB: Female HV Panel Mount Receptacle/Connector, Black
  26. TL-HVW: 20kV Rated 18 AWG Test Lead 4ft , HVC-MW to Alligator Clip
  27. TL-HVB: 20kV Rated 18 AWG Test Lead 4ft , HVC-MB to Alligator Clip
  28. HVW-20: Bulk 20kV Rated 18 AWG Test Lead Wire, Price per Feet

Related Catalog

964i-Catalog

Our Company

Miko, established in 1980, is a leading instrumentation distributor in Hong Kong and China.

Over the years, we have been fully engaged in the sales and marketing of electronic T&M instruments in the territory. Our market sector coverage includes telecommunication, power, data communication, audio, broadcasting and education.