XT9812 (150V LED Programmable LED Electronic DC Load)

關於產品

The XiTRON XT9812 Series Programmable LED DC Electronic Loads are new generation products designed to test LED driver applications. A special circuit has been designed within the XT9812 Series to support this unique application. Incorporating high-performance chips, the XT9812 Series deliver high speed and high accuracy with a resolution of 0.1mV and 0.01mA (basic accuracy is 0.03% and basic current rise speed is 2.5A/μs). The XT9812 Series have wide use application utilization from production lines to engineering for solid state lighting, cell phone chargers, cell phone batteries, electronic vehicle batteries, switching power supplies, linear power supplies and LED drivers. The XT9812 Series can be used in lighting manufacturers, designers, research institutes, automotive electronics, aeronautic and astronautic, maritime, solar cell and fuel cell test and measurement applications. USB interface and the XiTRON XView Utility Software are provided as standard accessories.

產品特點

Six high speed operation modes: CC, CR, CV, CW, CC+CV, CR+CV
Input rating
- XT9812: 0 to 150V, 0 to 30A
- XT9812B: 0 to 500V, 0 to 15A
LED test mode for LED driver power testing, steady reading and capable of simulating capacitance sensitive drivers
Over current, over voltage, over power, overheating and polarity reversal protection
High-luminance Vacuum Fluorescent Display (VFD) screen with two line, four channels display
Intelligent fan system will automatically activate based on changing ambient temperatures
Soft-start time setting, activating the power supply in accordance with the set voltage value
Battery test and short-circuit test functions
Capable of dynamic testing with rising edge and falling edge settings
Supports external trigger on either input or output
External current waveform monitor terminal output terminal
Supports remote voltage compensation and multi-data storage
Power-on-self-test, software calibration and standard rack mountable
Arbitrary waveform editing
USB interface and XiTRON XView Utility Software are provided as standard

產品功能

CC Mode
- 0-3A range with 0.1mA resolution / 0-30A with 1mA resolution (XT9812)
- 0-3A range with 0.1mA resolution / 0-15A with 1mA resolution (XT9812B)
CV Mode
- 1-19.999V range with 1mV resolution with 0.03%+0.02%FS accuracy / 0.1-150V with 10mV with 0.03%+0.02% FS accuracy (XT9812)
- 1-19.999V range with 1mV resolution with 0.03%+0.02%FS accuracy / 0.1-500V with 10mV with 0.03%+0.05% FS accuracy (XT9812B)
W Measurement (Input Current ≥ 10% FS) and (Input Voltage ≥ 10% FS)
- 100W power, 1mW resolution, 0.1%+0.1% FS accuracy (XT9812)
- 300W power, 10mW resolution, 0.1%+0.1% FS accuracy (XT9812B)
Edits arbitrary waveforms in list function
XiTRON XView Utility Software
- While all XiTRON precision test equipment is designed to be used in a completely stand-alone manner, there are times when external tools can aid or enhance the operation of an instrument. The XiTRON XView software tools and drivers are designed to help easily configure an instrument from a single screen, or are used to view a complete set of measurements in a single screen. Other XView tools are designed for data collection where results can be recorded in an Excel-compatible file for post-processing, insertion into reports, or simply for archival purposes. The XiTRON XView Utility Software comes as standard for XT9812 Series

產品應用

LED power driver testing
DC power supply testing
Cell phone charger
Cell phone battery
Electronic vehicle battery
Switching power supply testing
Linear power supply testing
Automotive electronic
Solar cells and fuel cells markets

標準配件

USB Interface
DB Sub 9 Pin Multifunctional Communications Interface for RS232, RS485 and USB Serial Buses
CD for XiTRON XView Utility Software and Operation Manual
Power Cable

產品選項

M133 D Sub 9 to USB Conversion Cable

關於力高

力高，成立於1980年，是一家以香港及中國大陸為基地之先進電子儀器代理商。

在過去歲月中，我們全力從事電子測試儀器銷售行業. 應用範圍廣泛覆蓋電訊，電源，數據通訊，無線通訊技術，音響及教育等各類市場。

XT9812 (150V LED Programmable LED Electronic DC Load)