IT8513C+ (600W, 120V/120A, Measurement Resolution 0.1mV/1mA, 1-Ch High Accuracy Programmable DC Electronic Load with 9-pin Serial Port Interface)

關於產品

The ITECH IT8500+ Series DC Electronic Loads are single channel, high accuracy programmable DC electronic loads which are designed to build for middle- and high-end application. The IT8500+ Series are composed of 9 models with high measurement resolution 0.1mV/0.1mA in max, CV/CC/CR/CP modes, short-circuit simulation, testing function, easy operation and display access keys, all providing the greatest test convenience for complex tests and solution easily and rapidly. The IT8500+ Series can be offered as multiple solutions according to customer’s design and testing requirements. The user can perform online voltage measurements and adjustments or simulate short circuit test using the simple keypad on the front panel. With option IT-254, the automatic test function can be processed. The IT8500+ Series are valuable high performance products; they are strong, smart and reliable DC electronic loads which are widely used in R&D, production testing lines and maintenance center in favorite for static and dynamic testing of power supplies, batteries, DC-DC converters, battery chargers and multi-purpose power testing solution and application.

產品特點

Display screen: Highlight VFD display
Maximum load power of single channel up to 3000W, load voltage 120V and load current 240A (IT8516C+)
4 modes of operation: CV, CC, CR, CP
CV mode
- IT8511A+
  - Range: 1-18V
    - Resolution: 1mV
    - Accuracy: ± (0.05% + 0.025%FS)
  - Range: 1-150V
    - Resolution: 10mV
    - Accuracy: ± (0.05% + 0.025%FS)
- IT8512A+
  - Range: 0-18V
    - Resolution: 1mV
    - Accuracy: ± (0.05% + 0.02%FS)
  - Range: 0-150V
    - Resolution: 10mV
    - Accuracy: ± (0.05% + 0.025%FS)
- IT8512B+
  - Range: 0-50V
    - Resolution: 1mV
    - Accuracy: ± (0.05% + 0.02%FS)
  - Range: 0-500V
    - Resolution: 10mV
    - Accuracy: ± (0.05% + 0.025%FS)
- IT8512C+, IT8513C+, IT8514C+
  - Range: 0-18V
    - Resolution: 1mV
    - Accuracy: ± (0.05% + 0.02%FS)
  - Range: 0-120V
    - Resolution: 10mV
    - Accuracy: ± (0.05% + 0.025%FS)
- IT8512H+
  - Range: 0-80V
    - Resolution: 1mV
    - Accuracy: ± (0.05% + 0.05%FS)
  - Range: 0-800V
    - Resolution: 10mV
    - Accuracy: ± (0.05% + 0.05%FS)
- IT8514B+
  - Range: 1-50V
    - Resolution: 1mV
    - Accuracy: ± (0.05% + 0.02%FS)
  - Range: 1-500V
    - Resolution: 10mV
    - Accuracy: ± (0.05% + 0.025%FS)
- IT8516C+
  - Range: 1-18V
    - Resolution: 1mV
    - Accuracy: ± (0.05% + 0.02%FS)
  - Range: 1-120V
    - Resolution: 10mV
    - Accuracy: ± (0.05% + 0.025%FS)
CC mode
- IT8511A+, IT8512A+
  - Range: 0-3A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
  - Range: 0-30A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
- IT8512B+
  - Range: 0-3A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
  - Range: 0-15A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
- IT8512C+
  - Range: 0-6A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
  - Range: 0-60A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
- IT8512H+
  - Range: 0-1A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.1%FS)
  - Range: 0-5A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.1%FS)
- IT8513C+
  - Range: 0-12A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
  - Range: 0-120A
    - Resolution: 10mA
    - Accuracy: ± (0.05% + 0.05%FS)
- IT8514B+
  - Range: 0-6A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
  - Range: 0-60A
    - Resolution: 10mA
    - Accuracy: ± (0.05% + 0.05%FS)
- IT8514C+
  - Range: 0-24A
    - Resolution: 1mA
    - Accuracy: ± (0.05% + 0.05%FS)
  - Range: 0-240A
    - Resolution: 10mA
    - Accuracy: ± (0.05% + 0.05%FS)
- IT8516C+
  - Range: 0-24A
    - Resolution: 1mA
    - Accuracy: ± (0.1% + 0.1%FS)
  - Range: 0-240A
    - Resolution: 10mA
    - Accuracy: ± (0.1% + 0.1%FS)
CR mode
- IT8511A+
  - Range: 1Ω-10Ω
    - Resolution: 16 bit
    - Accuracy: 01% + 0.08S
  - Range: 10Ω-7.5kΩ
    - Resolution: 16 bit
    - Accuracy: 01% + 0.0008S
- IT8512A+, IT8512C+, IT8513C+, IT8514C+
  - Range: 05Ω-10Ω
    - Resolution: 16 bit
    - Accuracy: 01% + 0.08S
  - Range: 10Ω-7.5kΩ
    - Resolution: 16 bit
    - Accuracy: 01% + 0.0008S
- IT8512B+
  - Range: 3Ω-10Ω
    - Resolution: 16 bit
    - Accuracy: 01% + 0.08S
  - Range: 10Ω-7.5kΩ
    - Resolution: 16 bit
    - Accuracy: 01% + 0.0008S
- IT8512H+
  - Range: 2Ω-10Ω
    - Resolution: 16 bit
    - Accuracy: 01% + 0.08S
  - Range: 10Ω-7.5kΩ
    - Resolution: 16 bit
    - Accuracy: 01% + 0.0008S
- IT8514B+
  - Range: 05Ω-10Ω
    - Resolution: 16 bit
    - Accuracy: 02% + 0.08S
  - Range: 10Ω-7.5kΩ
    - Resolution: 16 bit
    - Accuracy: 01% + 0.0008S
- IT8516C+
  - Range: 05Ω-10Ω
    - Resolution: 16 bit
    - Accuracy: 02% + 0.08S
  - Range: 10Ω-7.5kΩ
    - Resolution: 16 bit
    - Accuracy: 02% + 0.0008S
- Note: S is the resistance readback range and known as
  - S = 1/[1/R+(1/R)*0.01%+0.08],1/[1/R-(1/R)*0.01%-0.08] (IT8511A+, IT8512A+, IT8512B+, IT8512C+, IT8512H+, IT8513C+)
  - S = 1/[1/R+(1/R)*0.02%+0.08],1/[1/R-(1/R)*0.02%-0.08] (IT8514B+, IT8514C+, IT8516C+)
CP mode
- IT8511A+
  - Range: 150W
    - Resolution: 10mW
    - Accuracy: 2% + 0.2%FS
- IT8512A+
  - Range: 300W
    - Resolution: 10mW
    - Accuracy: ± (0.1% + 0.1%FS)
- IT8512B+
  - Range: 300W
    - Resolution: 10mW
    - Accuracy: 1% + 0.1%FS
- IT8512C+
  - Range: 300W
    - Resolution: 10mW
    - Accuracy: 1% + 0.1%FS
- IT8513C+
  - Range: 600W
    - Resolution: 10mW
    - Accuracy: 2% + 0.2%FS
- IT8512H+
  - Range: 300W
    - Resolution: 10mW
    - Accuracy: 2% + 0.2%FS
- IT8514B+
  - Range: 1500W
    - Resolution: 10mW
    - Accuracy: ± (0.2% + 0.2%FS)
- IT8514C+
  - Range: 1500W
    - Resolution: 10mW
    - Accuracy: 2% + 0.2%FS
- IT8516C+
  - Range: 3000W
    - Resolution: 10mW
    - Accuracy: ± (0.2% + 0.2%FS)
High measurement resolution in load ratings
- Power: 10mW
- Voltage: 1mV in max
- Current: 1mA in max
High measurement accuracy in load ratings
- Power: ± (0.1% + 0.1%FS) in max
- Voltage: ± (0.025% + 0.025%FS) in max
- Current: ± (0.05% + 0.05%FS) in max
Dynamic mode: Up to 10kHz
Convenient data entry via knob or numerical key pad
With rotary coding switch to make an easy operation
Battery test, automatic test, OPP test, OCP test functions. The load will default in the specified mode when turn it on
Short circuit simulation
Remote sense function
Current monitoring function
Automatic test function when with option IT-254 Keyboard Coordinating IT8500+ Series for Automatic Test Function (See photo section)
Power off memory function
Portable strong case equipped with non-slip feet
Intelligent fans cooling
Memory capacity: 100 groups, for save and recall
Built-in buzzer function
Provide free remote control software (IT9000-PV8500) with strong function saving secondary development time
Versatile interface
- 9-pin Serial Port interface (IT8511A+, IT8512A+, IT8512B+, IT8512C+, IT8512H+, IT8513C+)
- RS232 and USB interfaces (IT8514B+, IT8514C+, IT8516C+)

產品功能

Transient mode enables the module to periodically switch between two load levels, as might be required for testing power supplies. There are three different transient testing modes: continuous, pulse, and toggle (See photo section)
- Continuous mode: The IT8500+ Series generate a repetitive pulse stream that toggles between two load levels. Load could switch the state between two value settings, A/B (See photo section)
- Pulse mode: The IT8500+ Series generate a transient pulse of programmable width when pulse transient operation is in effect. The load will automatically switch to A level after maintaining A width time. Then it will switch to B level. The load will not switch to A level again until the instrument receives the pulse signal
- Toggle mode: The IT8500+ Series switch between A level and B level when receiving a trigger signal after the transient operation is enabled
Automatic test function: The automatic test function of the IT8500+ Series is useful for simulating various tests and allows the user to edit up to 10 groups of testing files. Each file has 10 steps and up to 100 files can be edited and saved into the EPROM. The automatic test function needs to work compatible with the option IT-254 Keyboard Coordinating IT8500+ Series for Automatic Test Function
List mode allows you to generate a complex current sequence. Moreover, the mode change can be synchronized with an internal or external singal to accomplish dynamic and precise test which can save cost for users. Users can edit step value, pulse width and slope sequence and meet a complex test request. A list file includes following parameters: file name step counts (range 2-84), time width of single step (0.00002s-3600s), step value and slope. The edited list file can be recalled easily. The DC load provides 7 nonvolatile regisers to save list files setting for recall later. In the list mode, the DC start to run the list file once receiving a trigger signal, continue to run until end of the operation or receiving another trigger
Remote sense: When working in CC, CV, CP and CR mode, if the electronic load consumes a very large current, it will cause a voltage drop in the leads between the connected device and terminals of the electronic load. In order to ensure testing accuracy, the electronic load provides a pair of remote sensing terminals in the rear panel where users can sense the output terminal voltage of the connected device. Users should set the electronic load in REMOTE SENSE mode before using this function. By eliminating the effect of the voltage drop in the load leads, remote sensing provides greater accuracy by allowing the electronic load to regulate directly at the source’s output terminals
Battery mode: A battery test mode is provided that will measure the ampere*hour (A*hr) characteristic of a battery. It measures the time it takes for a battery voltage to drop to a specified value while drawing a constant current from the battery. There are three stop conditions for IT8500+ Series: time, capacity and voltage. In addition, user can make any combination of stop conditions to achieve “ And ”, “ Or ” relationship. When one or more stop conditions are satisfied, the test is ended and the discharging time, capacity in ampere*hours (A*hrs) of the battery is calculated and displayed on the front panel
Short circuit simulation function

產品應用

Automotive electronics test solution
Solar and photovoltaic inverter test solution
LED lighting and driver test solution
Battery test solution such as stability test on battery discharging parameters in low power accuracy measurement, standby power consumption, efficiency for Ipad, Cellphone and various electronic devices
Power supply test solution

標準配件

9-pin Serial Port Interface (IT8511A+, IT8512A+, IT8512B+, IT8512C+, IT8512H+, IT8513C+)
RS232 Interface (IT8514B+, IT8514C+, IT8516C+)
USB Interface (IT8514B+, IT8514C+, IT8516C+)
USB Cable (IT8514B+, IT8514C+, IT8516C+)
Calibration Report
CD (Operation Manual & Communication Protocol Manual)
Power Cable

產品選項

IT-E121: RS232 Interface (IT8511A+, IT8512A+, IT8512B+, IT8512C+, IT8512H+, IT8513C+)
IT-E122: USB Interface (IT8511A+, IT8512A+, IT8512B+, IT8512C+, IT8512H+, IT8513C+)
IT-E123: RS485 Interface (IT8511A+, IT8512A+, IT8512B+, IT8512C+, IT8512H+, IT8513C+)
IT-254: Keyboard Coordinating IT8500+ Series for Automatic Test Function
IT-E301/30A: 30A Red & Black Testing Wires 200cm x 2
IT-E301/60A: 60A Red & Black Testing Wires 150cm x 2
IT-E301/120A: 120A Red & Black Testing Wires 200cm x 2
IT-E301/240A: 240A Red & Black Testing Wires 200cm x 2

關於力高

力高，成立於1980年，是一家以香港及中國大陸為基地之先進電子儀器代理商。

在過去歲月中，我們全力從事電子測試儀器銷售行業. 應用範圍廣泛覆蓋電訊，電源，數據通訊，無線通訊技術，音響及教育等各類市場。

IT8513C+ (600W, 120V/120A, Measurement Resolution 0.1mV/1mA, 1-Ch High Accuracy Programmable DC Electronic Load with 9-pin Serial Port Interface)

IT8513C+ (600W, 120V/120A, Measurement Resolution 0.1mV/1mA, 1-Ch High Accuracy Programmable DC Electronic Load with 9-pin Serial Port Interface)

關於產品

產品特點

產品功能

產品應用

標準配件

產品選項

相關目錄

關於力高

相關商品

IT8512B+ (300W, 500V/15A, Measurement Resolution 1mV/0.1mA, 1-Ch High Accuracy Programmable DC Electronic Load with 9-pin Serial Port Interface)

IT8732B (300W, 500V/20A, Measurement Resolution 1mV/0.01mA, 1-Ch Programmable DC Electronic Load)

IT8211 (150W, 60V/30A, Measurement Resolution 1mV/1mA, 1-Ch High Accuracy DC Electronic Load)

IT8733B (500W, 500V/30A, Measurement Resolution 1mV/0.01mA, 1-Ch Programmable DC Electronic Load)

IT8814C (1500W, 120V/240A, Measurement Resolution 0.1mV/1mA, 1-Ch High Accuracy Programmable DC Electronic Load)

IT8722B (250W/500V/15A-Ch1 & 250W/500V/15A-Ch2, 300W for Ch1 + Ch2, Measurement Resolution 1mV/0.1mA, 2-Ch Programmable DC Electronic Load)