2503AH-1Ch (1-channel High Performance Power Analyzer)


型號系列: 2503AH (系列)

關於產品

The XiTRON 2503AH Series High Performance Power Analyzers measure power, voltage and current up to 500kHz with premier precision. Available parameters include V, A, W, Power Factor, Crest Factor, K Factor, THD, Harmonics, Phase, VA, VAR, W.Hr, Triplens, Impedance, Inrush, Mean-Peak Values and Efficiency Loss. The 2503AH Series High Performance Power Analyzers have set the standard for production testing. Independent channel control and unparalleled flexibility and speed have made the 2503AH-3Ch the instrument of choice in 3-phase power analysis. The 2503AH-1Ch/2503AH-2Ch offers cost effective solutions for single or two-phase applications such as power supply and appliance testing. Various versatile interfaces such as GPIB, RS232 and Parallel Printer Interfaces and the XiTRON XView Utility Software are all provided as standard accessories.

產品特點

  • 18-bit A/D resolution, 500kHz sampling speed provides 0.05% basic accuracy
  • Ultrafast FFT’s per channel produce measurements in 10ms
  • 3000V Peak, 50 Amp Peak measurable with internal shunt and optional internal Hall Effect CTs
  • Pre-configured for ballast, motor, power supply and appliance tests
  • Real-time, ultra-fast, harmonic analysis
  • Application specific configurations
  • External CT and PT capability ratio: 000001-1000000 to 1, for A/V, A/A or V/V
  • Frequency measurement: 500µHz to 170kHz, 0.01% of reading
  • Measurement period: User defined from 1ms to 27.8 hours
  • Watt, VA & VAR accuracy highest of V* Amp error or Amp* V error yields max error for either Watts, VA or VAR
  • Accumulation accuracy WHr, VAHr, AHr up to 9999.9 GWHr/GVAHr
  • Timing Accuracy: 01% + 10ms, start/stop error
  • Two 32MHz Digital Signal Processors for each channel
  • 2pcs RS232 Interface, GPIB Interface and Parallel Printer Port are provided as standard
  • Full stand-alone compliance with IEC1000-3-2 and IEC1000-3-3
  • IEC61000-3-3 Flicker Analysis capability (with Option F)
  • XiTRON XView Utility Software is provided as standard

產品功能

  • Basic operation involves defining (configuring) test parameters for UUT and reading the results
  • Pre-programmed QUICK START configurations, which are based on factory defaults
  • Multiple configurations can be set at one time to provide a full analysis of test equipment. The dual and three channels allow to setup a number of applications or read multiple outputs on a complex device
  • Use the setup menus, such as the standard and advanced, to adapt the analyzer to product’s specialized needs. The IEC1000-3-2 and IEC1000-3-3 setups help configure the instrument for measurements in accordance with these standards
  • XiTRON XView Utility Software
    • While all XiTRON precision test equipment is designed to be used in a completely stand-alone manner, there are times when external tools can aid or enhance the operation of an instrument. The XiTRON XView software tools and drivers are designed to help easily configure an instrument from a single screen, or are used to view a complete set of measurements in a single screen. Other XView tools are designed for data collection where results can be recorded in an Excel-compatible file for post-processing, insertion into reports, or simply for archival purposes. The XiTRON XView Utility Software is provided as standard for 2503AH Series

產品應用

  • Troubleshooting: Fast measurement and display for system troubleshooting
  • Predictive maintenance: Test to avoid power quality problems before malfunctions occur
  • Service function: Measure for power quality before use
  • Long-term analysis: Recording function to help find out hidden and intermittent malfunctions
  • Load analysis: Check quality of electric systems before adding loads
  • Energy evaluation: Evaluate energy consumption before installation of energy-saving facilities
  • Motor lighting
  • Power conversion
  • Appliance test and development
  • Power supply testing

標準配件

  1. GPIB Interface
  2. 2pcs of RS-232 Interface
  3. Parallel Printer Interface
  4. CD for XiTRON XView Utility Software and Operation Manual
  5. Power Cable

產品選項

  1. F: IEC61000-3-3 Flicker Analysis Capability
  2. HE-1CH: 150A Peak Internal Hall Effect Current Transducer for 2503AH-1Ch
  3. HE-2CH: 150A Peak Internal Hall Effect Current Transducer for 2503AH-2Ch
  4. HE-3CH: 150A Peak Internal Hall Effect Current Transducer for 2503AH-3Ch
  5. HA: High Accuracy Calibration 40Hz-400Hz, 0.05% All Parameters
  6. 892-RE: 19″ Rack Adapter Kit
  7. MO2503AH: Additional Operation Manual Set

相關目錄

2503AH-Series-Catalog

關於力高

力高,成立於1980年,是一家以香港及中國大陸為基地之先進電子儀器代理商。

在過去歲月中,我們全力從事電子測試儀器銷售行業. 應用範圍廣泛覆蓋電訊,電源,數據通訊,無線通訊技術,音響教育等各類市場。