10kV Analog Curve Tracer (10kV Analog Curve Tracer)


品牌: Iwatsu (岩崎)
型號系列: CS (系列)
分類：

關於產品

The Iwatsu CS Series Semiconductor Curve Tracers are the newest curve tracers which can support from the maximum peak 3,000V/1,000A to 10,000V/8,000A. They can be used not only for characteristics measurement of high-voltage or high-current power devices such as the latest IGBT and power MOSFET but also for characteristics measurement of various semiconductor devices such as transistors, diode, and LEDs. The measurement results can be saved in the memory or sent to the PC through the USB port and LAN interfaces which are provided as standard.

 

產品特點

  • Display screen: 4″ Color TFT LCD display
  • The best solution to properly measure semiconductors such as IGBTs, MOSFETs, Transistors and Diodes from small to large quantities
  • The setting result is displayed in the setup display area under CONFIGURATION key sets. A proper connection is selected for device measurements (See photo section)
  • The applied voltage and current are monitored in signal waveforms on Wave mode (See photo section)
    • Actual pulse signal waveforms applied on a device at the measurement point can be monitored on the time axis as with oscilloscope Wave mode without extra probing
    • By confirming the waveform, appropriate pulse width and measurement timing can be decided
    • This function also helps confirming the abnormality caused by heat such as a oscillation
  • Versatile interfaces: LAN and USB are provided as standard

產品功能

  • Display screen: 4″ Color TFT LCD display
  • The best solution to properly measure semiconductors such as IGBTs, MOSFETs, Transistors and Diodes from small to large quantities
  • The setting result is displayed in the setup display area under CONFIGURATION key sets. A proper connection is selected for device measurements (See photo section)
  • The applied voltage and current are monitored in signal waveforms on Wave mode (See photo section)
    • Actual pulse signal waveforms applied on a device at the measurement point can be monitored on the time axis as with oscilloscope Wave mode without extra probing
    • By confirming the waveform, appropriate pulse width and measurement timing can be decided
    • This function also helps confirming the abnormality caused by heat such as a oscillation
  • Versatile interfaces: LAN and USB are provided as standard

產品應用

  • Characteristic measurement of high-voltage or high-current power devices such as IGBT and power MOSFET and semiconductor devices such as transistors, diode, and LEDs
  • Measurement of static characteristics (leakage current, saturation voltage, VF, Vth, etc.) (See photo section)
  • The measurement function for the transfer characteristics (Vge-Ic/Vge-Vce) and circuit modules
  • Measurement of devices
    • Multiple devices measurement and recordings can be performed in a short time. Operators just need to input sample name according to the device replacements and connection changes to repeat the same measurements. Judgments (Pass/Fail) at conditions given will be shown for each measurement and images and waveforms data also will be stored automatically (See photo section)
  • Evaluation of semiconductor temperature characteristics measurement
    • CS-810 controls hotplates too. Even measurement that takes a long time such as per temperature can also be performed automatically (See photo section)
  • Stress test
    • A wide variety of parameters can be incorporated in stress test. The CS-810 Software supports long-time reliability tests. While the software monitors the voltage and the current via curve traces, differences of those traces are logged. Auto measurement of a wide variety of parameters is available for the stress test as illustrated below. The biasing will stop in excess of the limit value which is set for current or voltage as a lower and upper limit. The CS-810 Software measures Ic or Vce (Interval: 10s to 2h) keeping a certain voltage or current (10s to 1,000h) (See photo section)
  • Wafer measurement as devices on wafers can be measured by connecting a prober system (See photo section)

標準配件

  1. CS-301 Fixture S: Comes with CS-3100
  2. CS-302 Fixture M: Comes with CS-3200, CS-3300
  3. CS-303 Fixture M: Comes with CS-5100, CS-5200, CS-5300
  4. CS-304 Fixture M: Comes with CS-5400
  5. Patch-panel for Fixture M: Comes with All Units except CS-3100
  6. CS-500 Test Adaptor: Comes with CS-3100, CS-3200, CS-3300, CS-5100, CS-5200, CS-5300, CS-5400
  7. CS-005 Standard Set of Leads: Comes with All Units except CS-3100
  8. CS-006 20cm Cable for High Current (a set of two): Comes with CS-5400
  9. CS-007 30cm Cable for High Current (a set of two): Comes with CS-10400, CS-10800, CS-12800, CS-15800
  10. LAN Interface
  11. USB Interface
  12. Operation Manual
  13. Power Cable

產品選項

  1. CS-501A: TO Type Adapter
  2. CS-502: Axial Adapter
  3. CS-503: TO-263-3 (D2PAK) Type Adapter
  4. CS-504: TO-252-3 Type Adapter
  5. CS-505: TO-263-7 Type Adapter
  6. CS-506: TO-252-5 Type Adapter
  7. CS-507: SC-70-3/SOT-323-3 Type Adapter
  8. CS-508: SMD Chip Adapter
  9. CS-509: SC-59A/SOT-23-3 Type Adapter
  10. CS-510: SC-62/SOT-89 Type Adapter
  11. CS-701: Switch Control Unit
  12. CS-702: LV Relay Unit 300V/30A
  13. CS-703: HV Relay Unit 5kV/0.5A (Max. Peak Current)
  14. CS-704: HC Relay Unit 2kV/7.5A (Max. Peak Current)/1,500A (Max. Peak Pulse Current)
  15. CS-705: HV/HC Switch Unit 5,000V/1,000A
  16. CS-706: Extension Unit 5kV/1000A (Max. Peak Pulse Current)
  17. CS-707: Gate/Short Unit, 5kV/7.5(Max. Peak Current)/15A (Max. Peak Pulse Current)
  18. CS-708: HV-HC Relay Unit 5kV/7.5A (Max. Peak Current)/1,500A (Max. Peak Pulse Current) 2Ch
  19. CS-709: HV-HC Relay Unit 5kV/7.5A (Max. Peak Current)/1,500A (Max. Peak Pulse Current) 4Ch
  20. CS-710: HV-HC Switch Unit 5kV/1,500A (Max. Peak Pulse Current)
  21. CS-800: Semiconductor Parameter Search Program
  22. CS-810: Semiconductor Parameter Measurement Application Program
  23. CTJ1050: Fixture with Hotplate Function (Heater surface 5kV insulating, Max. Temperature 200°C, Interlock Function)
  24. PA3020: Hotplate (Dimension of Plate Portion:  200mm x 200mm)
  25. PA3040: Hotplate (Dimension of Plate Portion:  200mm x 400mm)

相關目錄

Iwatsu-CS-Catalog-1

關於力高

力高，成立於1980年，是一家以香港及中國大陸為基地之先進電子儀器代理商。

在過去歲月中，我們全力從事電子測試儀器銷售行業. 應用範圍廣泛覆蓋電訊，電源，數據通訊，無線通訊技術，音響及教育等各類市場。

Related products