DS-5634 (350MHz, 2GS/s, 4CH, Max. 5M-points Digital Storage Oscilloscope)


Brand: Iwatsu
Model Series: DS5400-5600 Series

About Product

The Iwatsu DS-5400 Series and DS-5600 Series Digital Storage Oscilloscopes are absolutely the essential instruments with new functions providing excellent power and reliability in signal measurement.

Product Features

  • Display screen: 5” Color TFT LCD Touch Screen display
  • Long memory up to max 5M-points (DS-5600 Series), enabling long-term waveforms to be captured while maintaining high-speed sampling (See photo section)
  • High resolution
    • When measurements are taken at a sampling speed lower than the maximum sampling speed, it is possible to average the data captured at the maximum sampling speed, capture the waveforms, reduce random noise and increase vertical resolution to a level equivalent to a maximum of 12- This can also be used on non-repetitive single signals (See photo section)
  • Probe selection function (DS-5600 Series & DS-5400 Series) (See photo section)
  • Versatile interfaces
    • USB (DS-5400 Series, DS-5600 Series)
    • LAN (DS-5600 Series)

Product Functions

  • Four waveform parameter simultaneous judgment / waveform mask judgment functions (DS-5600 Series) (See photo section)
  • Reinforced noise reduction functions (DS-5600 Series)
    • Simple Moving Average
      • The Simple Moving Average (SMA) enables smoothing and noise reduction at the sampling points of the specified width, through the digital filters that can be set for each channel (See photo section)
    • Averaging count increased
      • The averaging count setting has been increased from 256 times to 65,536 times. This enables non-synchronized random noise signals to be effectively reduced from measured repetitive signals (See photo section)
  • Improved trigger function (DS-5600 Series & DS-5400 Series)
    • The trigger function has been reinforced so that waveforms can be triggered with optimal conditions, even for complex logic signals and serial data signals. Complex settings performed with pattern triggers can be smoothly set with the use of touch screen operations (See photo section)
  • Waveform calculation function (DS-5600 Series & DS-5400 Series)
    • Adds, subtracts and multiplies two waveforms, and performs frequency analysis (FFT) on channel waveforms. The DS-5600 Series supports differential and integral calculations. The calculated waveforms can be saved as data, and can be set as the source for the automatic measurement of waveform parameters (See photo section)
  • Double calculation of FFT, differential calculus and integral calculus (DS-5600 Series)
    • DS-5600 Series supports the double calculation of FFT, differential calculus and integral calculus (See photo section)
  • Remote control
    • Enables vast amounts of data to be collected and high-level analysis to be carried out on PCs

Product Application

  • Signal measurement and storage

Standard Accessories

  1. USB Interface
  2. LAN Interface (DS-5600 Series)
  3. Standard Probes
  4. Front Panel Cover
  5. CDROM for Instruction Manual and Remote Control Manual
  6. User Guide
  7. Power Cord

Product Options

  1. DS-576: GPIB Interface (Factory Option)
  2. DS-577: AUX I/O Option (CH1/CH2 output, Factory Option)
  3. DS-578: AUX I/O Option (CH1/TRIG output, Factory Option)
  4. DS-579: Probe Power Option
  5. E-3344: Carrying Bag (Commercial Item)
  6. IE-1226: VGA Video Output (Custom Order)
  7. SS-0170R: DC-400MHz, 6kV, 100:1, 2m High Voltage Probe
  8. SS-0171R: DC-400MHz, 4kV, 100:1, 2m High Voltage Probe
  9. HV-P30: 30kV DC+AC Peak or Single-pulse 40kV, 1000:1 High Voltage Probe
  10. HV-P60: 60kV DC+AC Peak or Single-pulse 80kV, 2000:1 High Voltage Probe
  11. PHV1000-RO: DC-400MHz, 1kVACrms (Cat II) or Pulse Peak 4kV, 100:1, 2m High Voltage Probe
  12. PHVS1000-RO: DC-400MHz, 1kV AC rms (Cat II) or Pulse Peak 6kV,1000:1, 2m High Voltage Probe
  13. PHV-641-LRO: DC-380MHz, 2kV ACrms (Cat II) or Pulse Peak 4kV, 100:1, 1.2m High Voltage Probe
  14. PHV-642-LRO: DC-300MHz, 2kV ACrms (Cat II) or Pulse Peak 4kV, 100:1, 2m High Voltage Probe
  15. PHV-643-LRO: DC-150MHz, 2kV ACrms (Cat II) or Pulse Peak 4kV, 100:1, 3m High Voltage Probe
  16. PHV661-LRO: DC-380MHz, 2.8kV ACrms (Cat II) or Pulse Peak 6kV, 100:1, 1.2m High Voltage Probe
  17. PHV662-LRO: DC-300MHz, 2.8kV ACrms (Cat II) or Pulse Peak 6kV, 100:1, 2m High Voltage Probe
  18. PHV663-LRO: DC-150MHz, 2.8kV ACrms (Cat II) or Pulse Peak 6kV, 100:1, 3m High Voltage Probe
  19. PHVS662-LRO: DC-400MHz, 2.8kV ACrms (Cat II) or Pulse Peak 6kV, 1000:1, 2m High Voltage Probe
  20. PHVS663-LRO: DC-250MHz, 2.8kV ACrms (Cat II) or Pulse Peak 6kV, 1000:1, 3m High Voltage Probe
  21. SS-320: DC-100MHz, 1kV ACrms High Voltage Differential Probe
  22. SFP-4A: DC-800MHz, 10:1, Approx. 2.15pF, Approx. 1MΩ FET Probe
  23. SFP-5A: DC-1GHz, 10: 1, Approx. 1.9pF, Approx. 1MΩ FET Probe
  24. PS-25: Power Supply for SFP-4A, SFP-5A and SS-320 (Input Voltage:  100V Only)
  25. SS-240A: DC-50MHz, Max Input Range:  30Arms, Max Peak Current:  50A Current Probe (Clamp Type)
  26. SS-250: DC-100MHz, Max Input Range:  30Arms, Max Peak Current:  50A Current Probe (Clamp Type)
  27. SS-260: DC-10MHz, Max Input Range:  150Arms, Max Peak Current:  300A Current Probe (Clamp Type)
  28. SS-270: DC-2MHz, Max Input Range:  500Arms, Max Peak Current: 700A Current Probe (Clamp Type)
  29. PS-26: Power Supply for SS-240A, SS-250, SS-260 and SS-270. Input Voltage: AC100V (AC120V/AC200V/AC220V are Factory-delivered Options)
  30. SS-281A:  110Hz-30MHz, Max Peak Current: 30A, -40 to 125 Degree, 1.5m Rogowski Current Probe
  31. SS-282A: 65Hz-30MHz, Max Peak Current:  60A, -40°C to +125°C, 1.5m Rogowski Current Probe
  32. SS-283A: 32Hz-30MHz, Max Peak Current:  120A, -40°C to +125°C, 1.5m Rogowski Current Probe
  33. SS-284A: 9Hz-30MHz, Max Peak Current:  300A, -40°C to +125°C, 1.5m Rogowski Current Probe
  34. SS-285A: 6Hz-30MHz, Max Peak Current:  600A, -40°C to +125°C, 1.5m Rogowski Current Probe
  35. SS-286A: 3Hz-30MHz, Max Peak Current:  1,200A, -40°C to +125°C, 1.5m Rogowski Current Probe
  36. SS-293S: 20MHz, Max Peak Current:  1,200A, -40°C to +125°C, 300mm Coil Length Rogowski Current Probe
  37. SS-294S: 20MHz, Max Peak Current:  3,000A, -40°C to +125°C, 300mm Coil Length Rogowski Current Probe
  38. SS-295S: 20MHz, Max Peak Current:  6,000A, -40°C to +125°C, 300mm Coil Length Rogowski Current Probe
  39. SS-296S: 20MHz, Max Peak Current:  12,000A, -40°C to +125°C, 300mm Coil length Rogowski Current Probe
  40. SS-293L: 10MHz, Max Peak Current:  1,200A, -40°C to +125°C, 700mm coil Length Rogowski Current Probe
  41. SS-294L: 10MHz, Max Peak Current:  3,000A, -40°C to +125°C, 700mm Coil Length Rogowski Current Probe
  42. SS-295L: 10MHz, Max Peak Current:  6,000A, -40°C to +125°C, 700mm Coil Length Rogowski Current Probe
  43. SS-296L: 10MHz, Max Peak Current:  12,000A, -40°C to +125°C, 700mm Coil Length Rogowski Current Probe

 

Related Catalog

Iwatsu-English-Catalog-4

Our Company

Miko, established in 1980, is a leading instrumentation distributor in Hong Kong and China.

Over the years, we have been fully engaged in the sales and marketing of electronic T&M instruments in the territory. Our market sector coverage includes telecommunication, power, data communication, audio, broadcasting and education.